Description

With these parts, you can mount the DSP add-on modules in the steel case for the DAC or Digi (taller V2 required!). Have a look at the assembly guide. This will only fit the XLR case.

The kit consists of the following parts:

• 4x screw M2.5×35
• 4x nut M2.5
• 2x spacer 29mm
• 2x spacer 11mm
• 2x spacer 16.5mm

Note that for the the M2.5 screws you need a 1.5mm hex key that’s not included. The 2mm hex key from the steel case doesn’t fit!