How to use the Amp+ with a BananaPro
Our HiFiBerry user Hermann Lauer has connected his HiFiBerry Amp+ to a BananaPro. The BananaPro is similar to the Raspberry Pi, the form factor is the same, however, the GPIOs aren’t. Therefore you can’t simply plug the Amp+ onto the BananaPro. He used jumper cables to connect both boards and integrated the Raspberry Pi Amp+ drivers into the BananaPro kernel sources.
Here is the guide how to connect the Amp+ to a BananaPro.
Note that this is a very advanced project. You need to be a skilled electronics maker and a good Linux system administrator before you should try something like this. Incorrectly connecting the two boards might damage them!